TS20 Series Water Softener

TS20 Series Water Softener

  • 2" internal porting provides higher service flows with less pressure drop
  • Level VI, 15V output DC power supply
  • Electronic meter demand with calendar day override
  • Scrolling user screen shows capacity remaining,
  • time of day and flow rate
  • 15-Volt DC relay driver allows 2 dry contact signals
  • Service interval screen reminds you to call for preventative maintenance service
  • Auxiliary input
  • Fully programmable cycle position and times
  • Nine cycle control with quiet operation
  • Soft water brine tank refill
  • Multiple backwash and rinse capabilities
  • Variable reserve automatically adjusts to water usage
  • Diagnostics for current & historical data
  • Permanent memory backup of all programming
  • 2-1/2 years time of day backup

Specifications


MODEL NAME MINERAL CU. FT. LOW SALT (6 lbs/ft³) MED SALT (10 lbs/ft³) HIGH SALT (15 lbs/ft³) FLOW RATE @15 PSI PEAK FLOW @25 PSI BACKWASH RATE (GPM) MINERAL TANK (INCHES) BRINE TANK (INCHES) SALT STORAGE (LBS)
TS20-90 3 60,000 81,000 90,000 15 21 5 14 x 65 24 x 50 900
TS20-120 4 80,000 108,000 120,000 20 28 7 16 x 65 24 x 50 900
TS20-150 5 100,000 135,000 150,000 25 35 9 18 x 65 24 x 50 900
TS20-180 6 120,000 162,000 180,000 30 42 12 21 x 62 24 x 50 900
TS20-210 7 140,000 189,000 210,000 35 49 12 21 x 62 24 x 50 900
TS20-240 8 160,000 216,000 240,000 40 56 16 24 x 72 24 x 50 900
TS20-300 10 200,000 270,000 300,000 50 70 16 24 x 72 24 x 50 900
TS20-450 15 300,000 405,000 450,000 75 105 25 30 x 72 30 x 50 1400
TS20-600 20 400,000 540,000 600,000 93 119 35 36 x 72 30 x 50 1400
TS20-750 25 500,000 675,000 750,000 98 127 50 42 x 72 30 x 50 1400
TS20-900 30 600,000 810,000 900,000 98 127 50 42 x 72 50 x 60 4500
TS20-1200 40 800,000 1,080,000 1,200,000 98 127 63 48 x 72 50 x 60 4500


Suggested brine tank size with grid plate option for medium salting. Product improvement designs are subject to change without notice.
Refer to “Flow Rates and Soft Water Quality (Hardness Leakage) if your application requires that levels of hardness leakage do not exceed “x”.